 |
 |
|
| N 110/HS with manual lift door and integrated control cabinet | Customized pit-type furnace S 73/HS, with rolling lid for bigger charges in crucibles |
Work platform in front of muffle to place load
Furnace chamber of S 73/HS with SiC-plates as muffle function
N 110/HS
The N 110/HS furnace is especially used for the assay of precious metals where the insulation and heating must be protected from emerging gasses and vapours. The furnace chamber forms a ceramic muffle which can easily be replaced. In the standard design, the muffle is closed with a firebrick plug. A lift door can be installed instead upon request.
- Tmax 1300 °C
- Muffle heated from four sides
- Heating elements and insulation protected by ceramic muffle
- Simple replacement of muffle
- Manual lift door
- Tool holder on furnace
- Stainless steel exhaust chimney above the door opening for connection of an exhaust system
- Work platform with embedded ceramic plate in front of the muffle opening to place load
- Front side with large service door for easy access to the furnace chamber behind the muffle
- Double-walled casing with fan cooling to reduce exterior temperatures
- Base frame with integrated switchgear and controller
Additional Equipment
- Electrical lift door drive with 2-hand button operation
- Second work platform with embedded ceramic plate below the standard platform
| Model | Tmax | Interior dimensions in mm | Volume | Outer dimensions in mm | Power | Electrical | Weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| °C | w | d | h | in L | W | D | H | kW | connection* | in kg | |
| N 110/HS | 1300 | 260 | 340 | 95 | 8 | 760 | 790 | 1435 | 22 | 3-phase | 510 |
| S 73/HS | 1200 | 530 | 380 | 360 | 73 | 1050 | 1530 | 900 | 26 | 3-phase | 890 |
| *Please see page 50 for more information about mains voltage | |||||||||||
