Manual Zone Control In combination with the bottom heating, the optional C 295 controller can manually control a second heating zone. As usual, you set the firing profile on the controller. If you determine that the temperature uniformity has to be changed from top to bottom, then you can easily make adjustments of this ratio.

Automatic Air-Inlet Damper After the chemically bound water has been expelled from the ceramics during firing (max. 600 °C), the air-inlet damper on the kiln must be closed to prevent drafts and to ensure good temperature uniformity in the upper temperature range. Nabertherm chamber kilns are generally equipped with adjustable air-inlet dampers. We alternatively offer you an electrical drive for the air-inlet dampers with fully automated control via the C 280 or C 290 controller as initial installation. If your furnace is equipped with a B 130 or another controller without extra function for damper activation, a semiautomatic air-inlet damper controlled via timer can alternatively be used. Electromagnetic closing of the damper occurs after the preset time has elapsed. Retrofitting with this semiautomatic solution is also possible.

Base in special height or on casters.

Loading rack for chamber furnaces. The entire kiln load may be ergonomically inserted or extracted in one movement using a pallet lift truck (N 150 ff). This allows the kiln to be fired again more quickly.

Batts, plates and posts. Matching sets of kiln furniture are available for every type of furnace. If you have a question, do not hesitate to ask us!

Nabertherm and your dealer can help arrange professional installation and assembly of your kiln into your studio. All of our kilns ship completely assembled in one piece. While other manufacturers sell sectional designs, we do not because it negatively affects the performance and safety of our kilns. A one-piece design may take more effort on the day you install your kiln, but its effortless operation every day thereafter more than makes up for this.