アート& クラフト

Chamber Kilns, Heated from Five Sides

Chamber kiln N 100 Chamber kiln N 200

N 1500

N 660/H

Motor driven exhaust air flap from chamber kiln N 440

Front made of textured stainless steel

N 100 - N 2200/H

First-class craftsmanship, professional design, long service life and excellent temperature uniformity – these are a few of the reasons our chamber kilns N 100 to N 2200/H are our best sellers to everyone looking for a professional kiln. These chamber kilns have proven their worth trough the years, firing porcelain, stoneware and annealing glass, also in case of tight setting and temperatures of up to 1340 °C. You will find these kilns in industry as well as in ceramic workshops, studios, clinics, schools and private homes – practically every place where a rugged, capable of frequent firings and excellent temperature uniformity is required. Most chamber kilns are available from stock. Also bigger models are available with short delivery times.

  • Dual shell housing, galvanized steel sheets
  • Front made of textured stainless steel
  • Environment-friendly, long-life powder-coating of housing
  • Rugged, self-supporting, vaulted arch construction
  • Controller mounted on kiln door and removable for comfortable operation
  • Multi-layer insulation with light-weight refractory bricks and high-quality, energy-saving backing insulation
  • Lightweight refractory bricks inside kiln chamber for clean firing results
  • Dual shell door with long-live sealing
  • Door sealing grinded by hand (brick on brick); N 100.. - N 300..
  • Door is adjustable
  • Door safety switch shuts down power to the elements when the door is opened
  • Heating from five sides with special arrangement of heating elements for optimum temperature uniformity
  • Heating elements of support tubes provide for free radiation of the heat
  • Solid state relays provide for low-noise operation
  • Rapid switching cycles result in precise temperature control
  • Type S thermocouple
  • Residual drying function: Air inlet flap closes at a temperature which can be set in the controller for N 100.. - N 300..
  • Exhaust air outlet in the ceiling, motor driven exhaust air flap for chamber kilns N 440.. - N 2200..
  • Delivery incl. pipe connection for connecting an air outlet with 80 mm diameter for N 100.. - N 300..
  • SiC-floor plate protects floor elements and provides a level setting surface
  • Base included in delivery (chamber kilns N 100.. - N 300..). Fixed base for larger models
  • Comfortable charging height with base of 800 mm (N 440../N 660.. = 500 mm)
  • Defined application within the constraints of the operating instructions
  • NTLog for Nabertherm Controller: Recording of process data with USB-flash drive
ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeight
 °Cwdhin lWDH1load kWconnection*in kg
N 1001300400530460100720113014409.03-phase275
N 15013004505305901507701130157011.03-phase320
N 20013004705307802007901130176015.03-phase375
N 30013005507007803008701300176020.03-phase450
N 4401300600750100045010001400183030.03-phase780
N 66013006001100100065010001750183040.03-phase950
N 1000130080010001250100013901760200057.03-phase1800
N 1500130090012001400150014901960215075.03-phase2500
N 220013001000140016002200159021602350110.03-phase3100
            
N 100/H 13404005304601007601150144011.03-phase325
N 150/H13404305306201507901150160015.03-phase380
N 200/H13405005307202008601150170020.03-phase430
N 300/H13405507007803009101320176027.03-phase550
N 440/H1340600750100045010001400183040.03-phase880
N 660/H13406001100100065010001750183052.03-phase1080
N 1000/H134080010001250100013901760200075.03-phase2320
N 1500/H1340900120014001500149019602150110.03-phase2700
N 2200/H13401000140016002200159021602350140.03-phase3600
1Base included *Please see page 30 for more information about supply voltage
 

Chamber Kilns, Heated from Two Sides

Chamber kiln N 40 E as tabletop device Chamber kiln N 70 E with base as additional equipment
N 40 E - N 100 E

These models are designed as chamber kilns with widely opening swing door and can be charged easily and clearly. These kilns can be used for ceramics, glass or porcelain painting as well as for simple fusing jobs. Appeealing design and attractive prices are unbeatable arguments for these chamber kilns. Most chamber kilns are available from stock.

  • Tabletop model as standard with dual shell housing, galvanized steel sheets
  • Controller mounted on kiln door and removable for comfortable operation
  • Multi-layer insulation with light-weight refractory bricks and high-quality, energy-saving backing insulation
  • Lightweight refractory bricks inside kiln chamber for clean firing results
  • Dual shell door with long-live sealing
  • Door sealing grinded by hand (brick on brick)
  • Door safety switch shuts down power to the elements when the door is opened
  • Heating from both sides, elements embedded in grooves for protection
  • Solid state relays provide for low-noise operation
  • Rapid switching cycles result in precise temperature control
  • Type S thermocouple
  • Infinitely adjustable air inlet in the kiln door for good ventilation and short cooling times
  • Exhaust air outlet in the ceiling
  • Delivery includes pipe connection for connecting an air outlet with 80 mm diameter
  • Defined application within the constraints of the operating instructions
  • NTLog for Nabertherm Controller: Recording of process data with USB-flash drive

Additional equipment

  • Base: comfortable charging height of 760 mm
ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeight
 °Cwdhin lWDH2load kWconnection*in kg
N 40 E1300350330350406408006002.91-phase90
N 40 E/R1300350330350406408006005.53-phase190
N 70 LE1200400380450706908507002.91-phase120
N 70 E1300400380450706908507003.61-phase120
N 70 E/R1300400380450706908507005.53-phase1120
N 100 E13004604405001007509107507.03-phase150
1Heating only beetween two phases *Please see page 30 for more information about supply voltage 2Height, including base, + 700 mm
 

Chamber Kilns, Heated from Three Sides

N 140 E N 280 E

Dual shell housing for cool outer surface

Motor driven exhaust air flap for chamber kiln N 500 E

N 140 LE - N 500 E

Heated from the left and right walls and floor and positioned at an ergonomic height, these chamber kilns are an economical solution for schools, kindergartens and other institutions. These kilns are ideal for operating temperatures of approx. 900 °C - 1300 °C. A dual shell housing provides for low outer temperatures. Firing profiles can be set comfortably at the controller mounted on the kiln door. Most chamber kilns are available from stock.

  • Dual shell housing, galvanized steel sheets
  • Environment-friendly, long-life powder-coating of housing
  • Rugged, self-supporting, vaulted arch construction
  • Controller mounted on kiln door and removable for comfortable operation
  • Multi-layer insulation with light-weight refractory bricks and high-quality, energy-saving backing insulation
  • Lightweight refractory bricks inside kiln chamber for clean firing results
  • Dual shell door with long-live sealing
  • Door sealing grinded by hand (brick on brick); N 140 E - N 280 E
  • Door is adjustable
  • Door safety switch shuts down power to the elements when the door is opened
  • Heated from two sides and the floor
  • Heating elements embedded in grooves for protection (N 140 E - N 280 E)
  • Freely radiating heating elements placed on supporting tubes (N 500 E)
  • Solid state relays provide for low-noise operation
  • Rapid switching cycles result in precise temperature control
  • Type S thermocouple
  • Residual drying function: Air inlet flap closes at a temperature which can be set in the controller for N 140 E - N 280 E
  • Exhaust air outlet in the ceiling, motor driven exhaust air flap for chamber kiln N 500 E
  • Delivery incl. pipe connection for connecting an air outlet with 80 mm diameter for N 140 E - N 280 E
  • Delivery incl. 3 ceramic supports and lower shelve for safe stacking of the kiln furniture (models N 140 E- N 280 E)
  • Delivery incl. SiC-bottom plate for even stacking of the kiln furniture (chamber kiln N 500 E)
  • Delivery incl. base
  • Comfortable charging height with base of 800 mm (chamber kiln N 500 E = 500 mm)
  • Defined application within the constraints of the operating instructions
  • NTLog for Nabertherm Controller: Recording of process data with USB-flash drive
ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeight
 °Cwdhin lWDH1load kWconnection*in kg
N 140 LE110045025805703140720113014406.01-phase4275
N 210 LE110050025807003210770113015709.03-phase320
N 280 LE110052025808903280790113017609.03-phase375
N 140 E130045025805703140720113014409.03-phase275
N 210 E1300500258070032107701130157011.03-phase320
N 280 E1300520258089032807901130176015.03-phase375
N 500 E1300600820100050010001400183030.03-phase700
1Base included 3Collar height minus 110 mm 2Collar width minus 50 mm 4Fusing of 32 A if connected to 230 V *Please see page 30 for more information about supply voltage