Artes & Artesanato

Top Loaders, Round/Oval

Top 220 Top 60eco

Top 100

Top 16/R

Front made of textured stainless steel

Top 16/R - Top 220

The perfect kiln for hobby and work shop! Attractive design, low weight and good firing results are only a few of the advantages of our top loaders. The small top loader Top 16/R is perfectly suited for glaze or sample firings. The bigger models are a good choice for home applications as well as for small schools or kindergartens. Most top loaders are available from stock.

  • Housing made of textured stainless steel
  • Controller mounted on the right side of the kiln with removable holder for comfortable operation
  • Multiple layers of insulation for low exterior temperatures
  • High-quality, energy-saving back insulation for top loaders Top 45eco, Top 60eco, Top 80 - Top 220
  • Lightweight refractory bricks inside kiln chamber for clean firing results
  • Lid with adjustable quick-release lock and padlock hasp
  • Adjustable lid mechanism
  • Long-life lid seal (brick on brick)
  • Lid interlock safety switch
  • Heating from all sides, elements embedded in grooves for protection
  • Bottom heating for top loader Top 220
  • Solid state relays provide for low-noise operation
  • Rapid switching cycles result in precise temperature control
  • Type S thermocouple
  • Powerful gas dampers support lid opening
  • Infinitely adjustable air inlet in opening in the kiln bottom for good ventilation and short cooling times
  • Exhaust air outlet on kiln side
  • Delivery includes pipe connection for connecting an air outlet with 80 mm diameter
  • Lockable castors for easy transport of kiln without the need for lifting
  • Top loader Top 16/R as tabletop model without castors
  • Models Top 60..: for Tmax of 1200  °C and 230V please choose model Top 60, for Tmax of 1300  °C and 230V please choose model Top 60eco as energy-saving version. If 400V three-phase connection is available, we recommend model Top 60/R which fastly heats up to the working temperature.
  • Defined application within the constraints of the operating instructions
  • NTLog for Nabertherm Controller: Recording of process data with USB-flash drive

Additional equipment

  • Bottom heating for very good temperature uniformity for Top 130 - Top 190 (standard for Top 220)
  • Two-zone control of heating via P470 controller (from model Top 130)
  • Raised base for Top 45 and Top 60
  • Wall-bracket for controller with 2.5 m connecting cable
ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConenctedElectricalWeight
 °Cwdhin lWDHload kWconnection*in kg
Top 16/R1300Ø 290230164406505302.61-phase32
Top 45eco1300Ø 41034045580 8807602.91-phase62
Top 451300Ø 410340455808807603.61-phase62
Top 45/R1300Ø 410340455808807605.53-phase162
Top 60/Leco1200Ø 410460605808708702.91-phase72
Top 601200Ø 410460605808708703.61-phase72
Top 60eco1300Ø 410460605808708703.61-phase72
Top 60/R1300Ø 41046060580 8708705.53-phase172
Top 801300Ø 480460806609508905.53-phase1100
Top 100 LE1100Ø 48057010066097010006.01-phase2102
Top 1001300Ø 48057010066097010007.03-phase102
Top 1301300Ø 59046013077010909209.03-phase110
Top 140 LE1100Ø 550570140730104010206.01-phase2124
Top 1401300Ø 550570140730104010209.03-phase124
Top 1601300Ø 590570160770109010309.03-phase130
Top 1901300Ø 5906901907701090115011.03-phase146
Top 22013009305904602201100103093015.03-phase150
1Heating only beetween two phases *Please see page 30 for more information about supply voltage 2Fusing of 32 A if connected to 230 V
 

Top Loaders Rectangular

Top loader HO 70/R Top loader HO 100

Firing chamber of top loader with heating from 5 sides

Front made of textured stainless steel

HO 70/L - HO 100

The square top loaders from Nabertherm are extremely rugged. Heated from four walls and the floor with the elements protected in grooves.

  • Housing made of textured stainless steel
  • Controller mounted on the right side of the kiln with removable holder for comfortable operation
  • Multi-layer insulation with light-weight refractory bricks and high-quality, energy-saving backing insulation
  • Lightweight refractory bricks inside kiln chamber for clean firing results
  • Lid with adjustable quick-release lock and padlock hasp
  • Adjustable lid mechanism
  • Long-life lid seal (brick on brick)
  • Lid interlock safety switch
  • Heating from all sides and bottom, elements embedded in grooves for protection
  • Solid state relays provide for low-noise operation
  • Rapid switching cycles result in precise temperature control
  • Type S thermocouple
  • Powerful gas dampers support lid opening
  • Infinitely adjustable air inlet in opening in the kiln bottom for good ventilation and short cooling times
  • Exhaust air outlet on kiln side
  • Delivery includes pipe connection for connecting an air outlet with 80 mm diameter
  • Lockable castors for easy transport of kiln without the need for lifting
  • Defined application within the constraints of the operating instructions
  • NTLog for Nabertherm Controller: Recording of process data with USB-flash drive
ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeight
 °Cwdhin lWDHload kWconnection*in kg
HO 70/L1200440380420706407707803.61-phase120
HO 70/R1300440380420706407707805.53-phase1120
HO 10013004804304901006808208505.53-phase1160
1Heating only beetween two phases *Please see page 30 for more information about supply voltage