Transportable Bale-Out Furnaces TM Electrically Heated, for Holding Aluminum
PRODUCT IMAGE PRODUCT IMAGE PRODUCT IMAGE
Transportable holding furnace TM 80/10 Meander heating elements
PRODUCT IMAGE

Slots under the furnace for the forklift forks

PRODUCT IMAGE

Plug socket on the furnace for the cable connection to the switchgear and control box

The bale-out furnaces of the TM product lines were developed especially for use at different pouring locations. The cylindrical, very stable furnace housing, the very high-quality insulation and the meandering heating elements are the special features of this furnace family. The furnaces are designed to be transported by forklift truck and come with a plug-in connection to the control gear. With a forklift truck the furnace can be transported to the pre-melt furnace for filling. When additional switchgear and control boxes are used, the furnace can also be optionally used at different pouring locations.

  • Tmax 1000 °C, ideal for holding of aluminum
  • Cylindrical, highly stable furnace housing
  • Slots under the furnace for safe forklift transportation of the furnace inside the foundry
  • All-round heating provided by resistant meandering heating elements
  • Switchgear and control box for plug-in connection
  • Heating of furnaces up to 60 kW power rating controlled using long-lasting, noiseless solid-state-relays
  • Heating of furnaces beyond 60 kW with contactors
  • Especially good insulation, multi-layered with fiber material in the furnace chamber
  • Emergency outlet for safe discharge of the melt in case of a crucible break
  • No exhaust gas vent necessary
  • Crucible in standard design not included
  • Furnace chamber control with temperature measurement behind the crucible
  • Over-temperature limiter in the furnace chamber to protect against over-temperature The limit controller switches off the heating when the pre-set limit temperature setting has been reached and does not switch it on again until the temperature falls below the setting again.
ModelTmaxCrucibleCapacityOuter dimensions
in mmHeating powerMelting output2Holding
Lid closed/open
 °CØHKg AlKg CuWDHin kW3kg/h Alkg/h CukW
TM 80/101000BU 200200-1000110095021only for holding4/91
TM 150/101000875600350-132014401000365/101
TM 240/101000BU 600600-122013401300427/151
1At 700 °C
2The specified melting performances are maximum values. In practice, approx. 80 % are achieved.
3Depending on furnace design connected load might be higher

giesserei_englisch catalogue Foundry
(URL: http://www.nabertherm.com/produkte/giesserei/giesserei_englisch.pdf)