High-Temperature Chamber Furnaces with SiC Rod Heating up to 1550 °C
HTC 276/16 HTC 160/16  

Vertically mounted SiC rods


Exhaust-air flap and charge thermocouple including a stand as additional equipment

HTC 16/16 - HTC 450/16

The high-temperature chamber furnaces HTC 16/16 - HTC 450/16 are heated by vertically hung SiC rods, which makes them especially suitable for sintering processes up to a maximum operating temperature of 1550 °C. The basic construction of these furnaces make them comparable with the already familiar models in the HT product line and they can be upgraded with the same additional equipment.

  • Tmax 1550  °C
  • Dual shell housing with fan cooling for low shell temperatures
  • Heating from both sides via vertically mounted SiC rods
  • High-quality fiber insulation backed by special insulation
  • Side insulation constructed with tongue and groove blocks provides for low heat loss to the outside
  • Long-life roof insulation with special suspension
  • Chain-guided parallel swivel door for defined opening and closing of the door
  • Labyrinth sealing ensures the least possible temperature loss in the door area
  • Specially reinforced furnace floor for accommodating high charge weights for model HTC 16 and above
  • Exhaust air opening in the furnace roof
  • Heating elements switched via SCR‘s
  • Over-temperature limiter with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
  • For additional equipment see models HT 04/16 - HT 450/18
ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeight
 °Cwdhin lWDHload kWconnection*in kg
HTC 16/16 155020030026016710650150012,03-phase¹270
HTC 40/16155030035035040810710161012,03-phase380
HTC 64/161550400400400641020840170018,03-phase550
HTC 128/16155040080040012810201250170026,03-phase750
HTC 160/16155050055055016011401020190021,03-phase800
HTC 276/161550500100055027611401470190036,03-phase1100
HTC 450/161550500115078045012001620206064,03-phase1500
¹Heating only between two phases *Please see page 61 for more information about supply voltage