Salt-Bath Furnaces for Heat Treatment of Steel or Light Metals
Generally, heat treatment can be carried out with shorter dwell times than in chamber furnaces.
Function and equipment
Salt-bath furnaces have an excellent temperature uniformity and ensure very good heat transfer to the work piece. Generally, heat treatment can be carried out with shorter dwell times than in chamber furnaces. Since the charge is heat treated with the exclusion of oxygen, scale and discoloration on the surface of the parts are kept to a minimum. The salt-bath furnaces TS 20/15 - TSB 90/80 can be used for heat treatment of metals in neutral and active salt baths. They are used for processes such as nitriding according to Tenifer up to 600 °C, carburization to 950 °C or bright annealing to 1000 °C.
The crucible is inserted so that it is suspended in the salt-bath furnace and can be replaced easily if necessary. Two crucible types are available:
- Type P: low carbon steel and CrNi plated for carburizing, neutral salt and annealing baths up to 850 °C
- Type C: high alloy CrNi steel for neutral salt and annealing baths up to 1000 °C
Crucibles are wearing parts because they are exposed to thermal stress during the heating and cooling process and corrosive salt. The following parameters influence wear of the crucible:
- Working temperature
- Number of heating and cooling cycles
- Salt
- Charge material
- Charge quantity
- Contamination of the charge
- The crucible must be checked regularly for wear and damage. We recommend to order a replacement crucible together with the furnace.
Salt-bath furnaces are available for heat treatment of steel and aluminum: Features for heat treatment of steel:
- Tmax in salt: 750 °C or 1000 °C
- Safety technology according to EN 60519-2
- Melt-bath control: the temperature is measured in the salt as well as inside the furnace behind the crucible
- Removable collar plate made of steel
- Insulated swing-away lid
- Temperature uniformity up to +/- 2 °C according to DIN 17052-1 in the salt bath
- Over-temperature limiter in the furnace chamber to protect persons and the furnace
- Crucible can be easily replaced
- Defined application within the constraints of the operating instructions
Features for heat treatment of aluminum like steel, but
- Tmax in salt: 550 °C
- Over-temperature limiter in the furnace chamber and in the salt bath to protect persons and the furnace
- Optical and acoustic alarm to warn if the critical temperature is exceeded
- Eurotherm 6100e temperature recorder to document the temperature profile
Salt-bath furnaces can be delivered electrically heated or gas-fired
- Electrically heated (TS models):
- Freely radiating, high quality heating elements on ceramic support tubes
- Crucible heated from four sides
- If a heating element is defective, the furnace can be heated with the remaining heating elements
- Gas-fired (TSB models):
- Burner system with optimized flame management: high level of efficiency with overpressure operation to prevent false air entering
- Burner technology according to DIN EN 7462, part 2
- Lateral exhaust gas feed around the crucible
Further products
Catalog
A complete overview of our extensive range of furnaces and accessories for various processes that take place under flammable or non-flammable reaction gases, in a salt bath or under vacuum can be found in our catalog "Thermal Process Technology II".
