Additive Manufacturing /
Ovens, also with Safety Technology According to EN 1539

Ovens, also with Safety Technology According to EN 1539

Oven TR 60 with adjustable fan speed Oven TR 240

Electrical rotating device as additional equipment

Extricable metal grids to load the oven in different layers

Oven TR 1050 with double door

Oven TR 120 LS with safety technology according to EN 1539 for charges containing liquid solvents

Oven TR 450

With their maximum working temperature of up to 300 °C and air circulation, the ovens achieve a perfect temperature uniformity which is much better than in ovens of most competitors. They can be used for various applications such as e.g. drying, sterilizing or warm storing. Ample warehousing of standard models provides for short delivery times.

  • Tmax 300 °C
  • Working temperature range: + 5 °C above room temperature up to 300 °C
  • Ovens TR 30 - TR 240 designed as tabletop models
  • Ovens TR 450 and TR 1050 designed as floor standing models
  • Horizontal, air circulation results in temperature uniformity better than +/- 5 °C (oven TR 30 up to +/- 4 °C) with closed exhaust flap in the empty workspace according to DIN 17052-1
  • Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean
  • Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
  • Large handle to open and close the door
  • Charging in multiple layers possible using removeable grids (number of removeable grids included, see table to the right)
  • Large, wide-opening swing door, hinged on the right with quick release for models TR 30 - TR 450
  • Double swing door with quick release for TR 1050
  • TR 1050 equipped transport rollers
  • Infinitely adjustable exhaust at the rear wall with operation from the front
  • PID microprocessor control with self-diagnosis system
  • Solid state relays provide for low­noise operation
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Additional equipment

  • Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the oven and load
  • Infinitely adjustable fan speed of the air circulation fan
  • Window for charge observing
  • Further removeable grids with rails
  • Side inlet
  • Stainless steel collecting pan to protect the furnace chamber
  • Door hinges on the left side
  • Reinforced bottom plate
  • Safety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity +/- 8 °C
  • Transport castors for model TR 450
  • Various modifications available for individual needs
  • Upgrading available to meet the quality requirements of AMS 2750 E or FDA
  • Process control and documentation via VCD software package for monitoring, documentation and control
ModelTmaxInner dimensions in mmVolumeOuter dimensions3 in mmConnectedElectricalWeightMinutesGrids in-GridsMax.
 °Cwdhin lWDHload kW2connection*in kgto Tmax4cludedmax.total load1
TR 30300360300300306105206652.11-phase45251480
TR 60300450390350607006107103.11-phase902514120
TR 60 LS260450360350577006807105.23-phase922514120
TR 1203006503905001209006108603.11-phase1204527150
TR 120 LS2606503605001179006808606.23-phase1224527150
TR 24030075055060024010007809703.11-phase1656028150
TR 240 LS26075053060023510008509706.23-phase1676028150
TR 4503007505501100450100078014706.23-phase23560315180
TR 1050300120067014001050147094019209.43-phase45080414250
1Max load per layer 30 kg *Please see page 73 for more information about supply voltage
2If EN 1539 is ordered connected load will increase
3External dimensions vary when furnace is equipped with additional equipment. Dimensions on request
4In the empty oven with closed flaps, connected to 230 V 1/N/PE resp. 400 V 3/N/PE