Chamber Furnaces for Annealing after Laser Sintering

Chamber furnace N 41/H Chamber furnace N 7/H with protective gas box

For the annealing of frameworks made of cobalt-chromium after laser sintering the chamber furnaces N 7/H - N 41/H are used. These furnaces will be equipped with a gax-box as well as an automatic gas-supply system for one non-flammable protective gas, e.g. Argon. Please ask for our catalog “Thermal Process Technology”.

  • Tmax 1150 °C
  • The recommended working temperature is max. 1100 °C. Higher wear and tear of the gassing box has to be expected at higher working temperatures up to 1150 °C
  • Three-sided heating from both sides and the bottom
  • Heating elements on support tubes ensure free heat radiation and a long service life
  • Bottom heating protected by heat-resistant SiC plate
  • Multi-layer insulation with high-quality lightweight refractory bricks in the furnace chamber
  • Exhaust opening in the side of the furnace, or on back wall of chamber furnace in the N 41/H models and higher
  • Chamber furnaces N 7/H - N 17/HR are designed as tabletop models
  • Base included with chamber furnace N 41/H
  • Protective gas boxes for inert gas atmosphere with additional thermocouple, type K
  • Solenoid valve, controlled via the extra function of the controller B400
  • Digital temperature indicator for measuring the temperature inside the gassing box
  • Charging plate and annealing and hardening foils
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
ModelTmaxInner dimensions protective gas box in mmVolumeOuter dimensions in mmConnectedElectricalWeightMinutes
 °Cwdhin lWDHload kWconnection*in kgto Tmax2
N 7/H11501801909098006506003.01-phase60180
N 11/H115018029090118007506003.51-phase70180
N 11/HR115018029090118007506005.53-phase170120
N 17/HR115018044090178009006006.43-phase190120
N 41/H11502803802004110401250134015.03-phase260120
1Heating only between two phases *Please see page 18 for more information about supply voltage
2If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE