o

Χειροτεχνία

Product Advantages Chamber Kilns

Multi-layer insulation with light-weight refractory bricks and energy-saving backing insulation adapted to the maximum kiln temperature
Only insulation materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used
Durable light-weight refractory brick insulation inside the kiln ensures clean firing results
Dual-shell housing provides for low temperatures and optimal corrosion protection. Galvanized steel sheets on the sides
Rugged, self-supporting, vaulted arch construction
Door seal „brick on brick“, precisely ingrained by hand to ensure tight sealing
Ergonomic charging height with 800 mm base (chamber kiln N 50 E = 500 mm)
Solid state relays ensure low-noise heater operation
Protected door contact switch
Infinitely adjustable air inlet damper for optimal air supply during firing and reduced cooling times included in the scope of delivery for chamber kilns from 440 liters
Controller mounted on kiln door and removable for comfortable operation
Semi-automatic air inlet flap for residual drying in chamber kilns up to 300 liters. The flap closes automatically at a set temperature and does not have to be closed manually after the drying phase.
Exhaust air opening in the center back of the kiln roof ensures even extraction of the exhaust air in chamber kilns up to 300 liters
Motor-driven exhaust air flap in the middle of the kiln roof provides for optimal ventilation of the kiln for chamber kilns from 440 liters