アート& クラフト

Product Advantages Chamber Kilns

  • Multi-layer insulation with light-weight refractory bricks and energy-saving backing insulation adapted to the maximum kiln temperature
  • Only insulation materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used
  • Durable light-weight refractory brick insulation inside the kiln ensures clean firing results
  • Dual-shell housing provides for low temperatures and optimal corrosion protection. Galvanized steel sheets on the sides
  • Rugged, self-supporting, vaulted arch construction
  • Door seal „brick on brick“, precisely ingrained by hand to ensure tight sealing
  • Ergonomic charging height with 800 mm base (chamber kiln N 50 E = 500 mm)
  • Solid state relays ensure low-noise heater operation
  • Protected door contact switch
  • Infinitely adjustable air inlet damper for optimal air supply during firing and reduced cooling times included in the scope of delivery for chamber kilns from 440 liters
  • Controller mounted on kiln door and removable for comfortable operation
  • Semi-automatic air inlet flap for residual drying in chamber kilns up to 300 liters. The flap closes automatically at a set temperature and does not have to be closed manually after the drying phase.
  • Exhaust air opening in the center back of the kiln roof ensures even extraction of the exhaust air in chamber kilns up to 300 liters
  • Motor-driven exhaust air flap in the middle of the kiln roof provides for optimal ventilation of the kiln for chamber kilns from 440 liters