Artes & Artesanato

Standard Equipment Chamber Kilns

We recommend:

Kilns should not be fired permanently at the maximum rated temperature. The models with a Tmax of 1300 °C are designed for regular firing temperatures from 900 °C - 1230 °C. When often used above these temperatures, we recommend our chamber kilns with 1340 °C.

Dual shell door with long-live sealing. Front made of attractive stainless steel (N 100 - N 2200/H, NW 150 - NW 1000/H).
SiC-floor plate protects floor elements and provides a level setting surface.
Dual shell housing for low exterior temperatures. Side sheets made of galvanized steel (N 100 - N 2200/H, NW 150 - NW 1000/H).
Controller mounted on kiln door and removable for comfortable operation.
Elements mounted on support tubes give free radiation of heat, longer element and wall life; optimized element positioning for excellent temperature uniformity (N 500 E, N 100 - N 2200/H, NW 150 - NW 1000/H).
Solid-state relays control the kiln heating. Operating silently and nearly wear-resistant, the solid-state relays switch with short pulses, giving excellent temperature uniformity and fast response times.
Residual drying function: Air inlet flap closes the air inlet at a temperature which can be set in the controller for NW 150 - NW 300, N 140 E - N 280 E, N 100 - N 300.
Infinitely adjustable air-inlet damper for optimum air supply during firing and reduced cooling time. Motor driven control available as additional equipment (from model NW 440, from model N 440, N 500 E).
Motor driven exhaust air flap in the middle of kiln ceiling for perfect air exhaust out of the chamber (from model NW 440, from model N 440, from model N 500 E).
Flue in the center-rear section of the ceiling ensures uniform flow of exhaust gasses up to model N 300, NW 300, N280 E.