Передвижные тигельные печи с вычерпыванием расплава TM с электрообогревом, для тепловой выдержки алюминия

Цилиндрический, очень устойчивый корпус печи, высококачественная изоляция и нагревательные элементы извилистой формы являются отличительными особенностями печей этой серии.

Управление процессами

Функции и оборудование

T 80_S1 mit Gabelstapler.png
Gedaempfte_Gabelst
TM_Maeander_HE.png
TM_Steckvorrichtung

The transportable bale-out furnaces of the TM product lines were developed especially for use at different pouring locations. The cylindrical, very stable furnace housing, the very high-quality insulation and the meander-shape heating elements are the special features of this furnace family. The furnaces are designed to be transported by forklift truck and come with a plug-in connection to the control gear. With a forklift truck the furnace can be transported to the pre-melt furnace for filling. Due to the filling of the bale-out furnace directly at the premelting furnace, the otherwise necessary intermediate transport by means of a transport ladle and an additional filling process can be omitted. This has a positive effect on both energy efficiency and melt quality. 

  • Tmax 1000 °C, ideal for holding of aluminum alloys
  • Cylindrical, highly stable furnace housing
  • Damper slots under the furnace for safe forklift transportation of the furnace with the melt inside the foundry
  • All-round heating provided by meander-shape heating elements
  • Plug connection on the furnace for easy disconnection of the connecting cable to the switchgear
  • Heating controlled using long-lasting solid-state-relays
  • Insulation constructed in multiple layers with lightweight refractory bricks on the hot face
  • Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
  • Emergency outlet for safe discharge of the melt in case of a crucible break
  • No exhaust gas vent necessary
  • Crucible in standard design not included
  • Over-temperature limiter in furnace chamber for protection against overheating. The limiter switches the heating off when the set limit temperature is reached, and only switches it back on after the temperature has fallen again.
  • Low-maintenance furnace chamber control with temperature measurement behind the crucible
  • Defined application within the constraints of the operating instructions

Дополнительное оборудование

Additional Equipment like Models T 

Спецификации

Model Tmax
furnace
Tmax
melt bath
Crucible Capacity
in kg
Heating power Consumption
holding
Lid closed/open
Outer dimensions3
in mm
  °C °C Ø H Al in kW2 kWh/h1 W D H
TM 80/10 1000 800 BU 200 200 21 4/9 1000 1100 1000
TM 150/10 1000 800 875 600 350 36 5/10 1320 1440 1000
TM 240/10 1000 800 BU 600 600 42 7/15 1220 1340 1300
TM 310/10 1000 800 1170 580 770 42 8/17 1650 1730 1050
1Al at 700 °C
2Depending on furnace design connected load might be higher
3External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.

Запрос коммерческого предложения

Запрос коммерческого предложения

CAPTCHA
Этот вопрос задается для того, чтобы выяснить, являетесь ли Вы человеком или представляете из себя автоматическую спам-рассылку.

Экспериментальный цех

Какая печь оптимально соответствует тому или иному процессу? Найти ответ на этот вопрос не всегда просто. В связи с этим мы располагаем уникальным экспериментальным цехом, которому нет равных по масштабу и многообразию процессов. В нем заказчики могут опробовать образцы, представляющие широкий ассортимент наших печей